Modularization Assessment of Product Architecture

    Research output: Working paperResearch

    Abstract

    Modularization refers to the opportunity for mixing-and-matching of components in a modular product design in which the standard interfaces between components are specified to allow for a range of variation in components to be substituted in a product architecture. It is through mixing-and-matching of these components, and how these components interface with one another, that new systems are reated.Consequently, the degree of modularization inherent in a system is highly dependent upon the components and the interface constraints shared among the components, modules, and sub-systems. In this paper, a mathematical model is derived for analyzing the degree of modularization in a given product architecture by taking into consideration the number of components, number of interfaces, the composition of new-to-the-firm (NTF) components, and substitutability of components. An analysis of Chrysler windshield wipers controller suggests that two product architectures may share similar interface constraints, but the opportunity for modularization of one module is significant higher than the other due to the higher substitutability of its components and lower composition of NTF components.
    Original languageEnglish
    Place of PublicationFrederiksberg
    PublisherDRUID - Danish Research Unit for Industrial Dynamics
    Number of pages34
    ISBN (Print)8778730880
    Publication statusPublished - 2000
    SeriesDRUID Working Paper
    Number2000-4

    Keywords

    • Product architecture
    • Modularization
    • Substitutability
    • New product development

    Cite this

    Mikkola, J. H. (2000). Modularization Assessment of Product Architecture. Frederiksberg: DRUID - Danish Research Unit for Industrial Dynamics. DRUID Working Paper, No. 2000-4
    Mikkola, Juliana Hsuan. / Modularization Assessment of Product Architecture. Frederiksberg : DRUID - Danish Research Unit for Industrial Dynamics, 2000. (DRUID Working Paper; No. 2000-4).
    @techreport{71f467c0c02411db9769000ea68e967b,
    title = "Modularization Assessment of Product Architecture",
    abstract = "Modularization refers to the opportunity for mixing-and-matching of components in a modular product design in which the standard interfaces between components are specified to allow for a range of variation in components to be substituted in a product architecture. It is through mixing-and-matching of these components, and how these components interface with one another, that new systems are reated.Consequently, the degree of modularization inherent in a system is highly dependent upon the components and the interface constraints shared among the components, modules, and sub-systems. In this paper, a mathematical model is derived for analyzing the degree of modularization in a given product architecture by taking into consideration the number of components, number of interfaces, the composition of new-to-the-firm (NTF) components, and substitutability of components. An analysis of Chrysler windshield wipers controller suggests that two product architectures may share similar interface constraints, but the opportunity for modularization of one module is significant higher than the other due to the higher substitutability of its components and lower composition of NTF components.",
    keywords = "Produktudvikling, Chrysler, modularisering, Product architecture, Modularization, Substitutability, New product development",
    author = "Mikkola, {Juliana Hsuan}",
    year = "2000",
    language = "English",
    isbn = "8778730880",
    series = "DRUID Working Paper",
    publisher = "DRUID - Danish Research Unit for Industrial Dynamics",
    number = "2000-4",
    address = "Denmark",
    type = "WorkingPaper",
    institution = "DRUID - Danish Research Unit for Industrial Dynamics",

    }

    Mikkola, JH 2000 'Modularization Assessment of Product Architecture' DRUID - Danish Research Unit for Industrial Dynamics, Frederiksberg.

    Modularization Assessment of Product Architecture. / Mikkola, Juliana Hsuan.

    Frederiksberg : DRUID - Danish Research Unit for Industrial Dynamics, 2000.

    Research output: Working paperResearch

    TY - UNPB

    T1 - Modularization Assessment of Product Architecture

    AU - Mikkola, Juliana Hsuan

    PY - 2000

    Y1 - 2000

    N2 - Modularization refers to the opportunity for mixing-and-matching of components in a modular product design in which the standard interfaces between components are specified to allow for a range of variation in components to be substituted in a product architecture. It is through mixing-and-matching of these components, and how these components interface with one another, that new systems are reated.Consequently, the degree of modularization inherent in a system is highly dependent upon the components and the interface constraints shared among the components, modules, and sub-systems. In this paper, a mathematical model is derived for analyzing the degree of modularization in a given product architecture by taking into consideration the number of components, number of interfaces, the composition of new-to-the-firm (NTF) components, and substitutability of components. An analysis of Chrysler windshield wipers controller suggests that two product architectures may share similar interface constraints, but the opportunity for modularization of one module is significant higher than the other due to the higher substitutability of its components and lower composition of NTF components.

    AB - Modularization refers to the opportunity for mixing-and-matching of components in a modular product design in which the standard interfaces between components are specified to allow for a range of variation in components to be substituted in a product architecture. It is through mixing-and-matching of these components, and how these components interface with one another, that new systems are reated.Consequently, the degree of modularization inherent in a system is highly dependent upon the components and the interface constraints shared among the components, modules, and sub-systems. In this paper, a mathematical model is derived for analyzing the degree of modularization in a given product architecture by taking into consideration the number of components, number of interfaces, the composition of new-to-the-firm (NTF) components, and substitutability of components. An analysis of Chrysler windshield wipers controller suggests that two product architectures may share similar interface constraints, but the opportunity for modularization of one module is significant higher than the other due to the higher substitutability of its components and lower composition of NTF components.

    KW - Produktudvikling

    KW - Chrysler

    KW - modularisering

    KW - Product architecture

    KW - Modularization

    KW - Substitutability

    KW - New product development

    M3 - Working paper

    SN - 8778730880

    T3 - DRUID Working Paper

    BT - Modularization Assessment of Product Architecture

    PB - DRUID - Danish Research Unit for Industrial Dynamics

    CY - Frederiksberg

    ER -

    Mikkola JH. Modularization Assessment of Product Architecture. Frederiksberg: DRUID - Danish Research Unit for Industrial Dynamics. 2000.